Clipsal C-Bus Especificações descarregar pdf (Página 86)

100

C-Bus

Product Overview

-Bus

Wireless System

Wireles

(For Australia and New Zealand)

C-Bus

Wireless Networks

To experience the full capabilities of wireless operation, C-Bus

Wireless units must be linked together to form a network.

To communicate with each other, units within the same

network should be located within 15 to 20 metres of each other.

This distance depends on building materials used.

Up to 30 units may be connected within the same C-Bus

Wireless network.

C-Bus

Wireless Network Security

C-Bus

Wireless units can optionally use 128 bit-encrypted

messages to communicate with each other. This results in a

highly secure network.

Nearby C-Bus

Wireless Networks

It is possible to have several separate networks present

alongside each other without interfering, as each separate

C-Bus

Wireless network has an automatically assigned, unique

‘House Code’.

C-Bus

Wireless Modes of Operation

C-Bus

Wireless units have ﬁ ve major modes of operation.

Mode 1

Stand-Alone Mode

In this mode, C-Bus

Wireless Wall Switches and Plug

Adaptors acts as stand-alone dimmers or switches and make

no use of the inbuilt wireless capabilities. No setup is required

for this mode, Plug Adaptors simply plug into the mains, and

Wireless Wall Switches are installed by a licensed electrician in

place of existing wall switches. The buttons on the units control

the local dimming or switching channels of the unit only.

Mode 2

Simple Remote Controlled Mode

In this mode, a C-Bus

Wireless Wall Switches acts as a

stand-alone dimmer or switch and a C-Bus

Wireless Remote

Control operates the Wall Switch from a distance. This mode

is simple to set up and is suitable for small installations where

networking is not needed. C-Bus

Wireless Wall Switch or Plug

Adaptor units are controlled using a C-Bus

Wireless Remote:

In this mode, the buttons on the Wireless Wall Plate control

the local dimming or switching channels of the unit, and the

Remote Control is linked to buttons on a Wall Switch using a

Learn Mode operation. No PC is required.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 99 100

Comentários a estes Manuais

Sem comentários

Clipsal C-Bus Especificações Página 86

Comentários a estes Manuais

Manuais e produtos relacionados com Monitor tátil Clipsal C-Bus