Intelligent Building Series C-Bus Infrared Transmitter Installation Instructions
12.0 Programming Requirements
The 5034NIRT C-Bus Infrared Transmitter Unit requires programming in order to
operate correctly:
12.1 Programming C-Bus Operating Parameters
The C-Bus Infrared Transmitter Unit must be programmed to set a unique
identification (Unit Address) and the mode of operation on the C-Bus Network.
C-Bus Installation Software v2.3.0 (or higher). can be used to configure the:
• Project Name
• Part Name
• Unit Address
• Clock (Enable/Disable)
• Network Burden (Enable/Disable)
12.2 Programming Infrared Operating Parameters
Specialised software is provided to configure the infrared codes, and associate
each to a C-Bus Network Variable (Group Address) so that it may be triggered.
The software is known as the CIRCA Software (C-Bus Infrared Commissioning
Application).
To install the CIRCA software, simply insert the CD into the CD Drive of your
personal computer or laptop and follow the on-screen prompts. The CD-ROM
also contains Online Documentation. Please refer to the C-Bus Infrared
Transmitter Programming Reference for further information relating to the
programming of the Unit’s infrared operating parameters.
Please note the following :
• The Unit is programmed using the CIRCA Software.
• The Unit can be programmed over C-Bus. Alternatively, the Unit can be
programmed using the optional high-speed download device (catalogue
number 5100HSC).
• The Unit incorporates a 32kB memory, of which the maximum library size
is 21.5kB for IR codes and protocol definitions.
• Actions (IR codes) can be triggered by C-Bus Group Addresses. Group
Addresses may be switched, or may make use of discrete levels to
initiate actions.
• The Unit supports up to 255 different actions.
• The Unit can be programmed to respond to C-Bus commands on up to 8
different C-Bus Applications.
• Special provision is made for infrared codes which require termination.
• The number of IR transmission frames can be set using the software.
• Please refer to the C-Bus Infrared Transmitter Programming Reference
for further information.
12.3 Important Warning
The use of any non C-Bus Software in conjunction with the hardware installation
without the written consent of Clipsal Integrated Systems may void any
warranties applicable to the hardware.
© Copyright 2002 Clipsal Integrated Systems Pty Ltd Page 10
(100 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais