Clipsal C-Bus Manual de Instruções descarregar pdf (Página 116)

C-Bus™ Basic Programming 1250SM0904R10/09

C-Bus™ Products Training Course 10/2009

The table below lists the more commonly used functions that are assigned

to the buttons of a C-Bus wall switch.

Function Description

Unused This function will have no affect on the wall switch button.

ON Turns the group address ON (100%).

OFF Turns the group address OFF (0%).

ON / OFF Toggles the group address ON and OFF from the same button, each time it is pressed.

Dimmer Toggles the group address ON and OFF from the same button, each time it is pressed. If the button

is held down, the group address will ramp up or down until the button is released.

On Up Toggles the group address between OFF (0%) and the previous ON level. If the button is held

down, the group address ramps up until the button is released.

Off Down Toggles the group address between OFF (0%) and the previous ON level. If the button is held

down, the group address ramps down until the button is released.

Timer Turns ON the group address and start a timer. Once the timer reaches a specified limit, it will

execute the action in the expiry function (usually turn the group address OFF).

Bell Press Turns the group address to ON while the button is held down. It will then turn the group address

OFF once the button is released.

Dimmer Up Turns the group address ON (100%). If the button is held down, the group address will only ramp up

until the button is released.

Dimmer Down Turns the group address OFF (0%). If the button is held down, the group address will only ramp

down until the button is released.

Soft Up Turns the group address ON (100%). If the button is held down, the group address will only ramp up

until the button is released.

Soft Down Ramps the group address to Off. If the button is held down, the group address will only ramp down

until the button is released.

Preset 1 & 2 Sets the group address to the specified level. If the button is held down, the group address will ramp

off.

Table 25 – Commonly used functions on a C-Bus wall switch

Many of these functions have an associated function so they can operate

with 2 button control. The complementary functions are:

 ON and OFF

 ON Up and OFF Down

 Dimmer Up and Dimmer Down

 Soft Up and Soft Down.

There are some additional functions that relate directly to using the C-Bus

Shutter Relay. These key functions are listed in the table below.

NOTE: These Functions work in association with the C-Bus Shutter Relay.

While the function may control part of the operation, the C-Bus Shutter

Relay will take control of other parts to the function.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 147 148

Sem comentários

Clipsal C-Bus Manual de Instruções Página 116