Clipsal C-Bus2 Especificações descarregar pdf (Página 26)

C-BUS TRAINING MANUAL - VOL 2

Icon Function

Hide Project Manager Hides the Project Manager, providing more room for the Units windows.

Add Unit Adds a new unit to the database. You are prompted to select a unit from a list of

known unit types. You can then enter a Serial Number, Unit Address and Name (tag)

for the unit.

Delete Unit Deletes a unit from the database.

All to Network Transfers the congureuration data of all units in the Database to units of the same

type with the same Unit Address on the Network.

Get Serials Transfers serial numbers of all units on the Network to units of the same type and

Unit Address in the Database.

Doc. Creates a le listing each unit in the database including its Part Name, Unit Type, and

Unit, Application, Area and Group Addresses. The data is written in ASCII Comma

Separated Value (CSV) format, suitable for use in a spreadsheet.

Edit Unit Presents you with a panel allowing you to congure the unit’s Application Address,

Group Address and many other parameters (depending on the unit type).

Unit -> Network Transfers the congureuration data of the selected unit in the Database to a unit of

the same type with the same Unit Address on the Network.

Copy Unit Make a copy of the selected unit.

Readdress Prompts you to select a new Unit Address for the selected unit.

Reinstall Transfers the congureuration data from a unit on the Network with a Unit Address

of 255, to the selected unit of the same type in the Database. It is not necessary to

use the “Scan Network” function in the “Units on Network” window rst.

Table 9 – Units in Database window icon functions

Icon Function

Scan Network Performs a complete scan of a connected C-Bus

Network. If multiple units have

the same Unit Address, you will be asked if you want to resolve the Unit Address

conict (unravel). Scanned units are loaded into the “Units on Network” window.

Scan New Performs a short scan of a connected C-Bus Network to search for units with a Unit

Address that is not present in the “Units on Network” window. Units with a duplicate

Unit Address will not be detected.

Ping Checks the C-Bus Network to see if the units present in “Units on Network” exist.

Add Unit -> DB Adds the selected unit on the Network to the Database (only if the Database has no

unit with the same Unit Address or serial number).

Set Addr. -> DB Changes the Unit Address of the selected unit to that of a compatible unit in the

Database.

Match Serials Changes the Unit Addresses of units on the Network to the Unit Addresses of units

in the database which have the same serial number. You are prompted with a list of

units so you can select which Addresses to change.

Readdress Prompts you to select a new Unit Address for the selected unit.

Unravel Checks the C-Bus Network for multiple units with the same Unit Address. If

duplicates are found you will be asked if you want to resolve the conﬂict (unravel).

All Units -> DB Transfers the conﬁgureuration data of all units on the Network to units of the same

type with the same Unit Address in the Database. Any units not present in the

Database will be added.

Unit -> DB Transfers the conﬁgureuration data of the selected unit to a unit of the same type

with the same Unit Address in the Database.

Make Network(When

bridge selected)

Creates, conﬁgures and opens a new Network corresponding to the other side of

the selected bridge or gateway.

Table 10 – Units on Network window icon functions

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 119 120

Comentários a estes Manuais

Sem comentários

Clipsal C-Bus2 Especificações Página 26

Comentários a estes Manuais

Manuais e produtos relacionados com Monitor tátil Clipsal C-Bus2