Clipsal C-Bus2 Especificações descarregar pdf (Página 59)

2C. Advanced Programming

2.2 Global Tab

Figure 9 – Editing a C-Bus

Neo

Wall Switch, with the Global tab selected

2.2.1 Debounce

The buttons used in wall switches are mechanical and may exhibit contact bounce during switching.

To achieve reliable switching operation, a preset time period must occur before the unit responds to

a button being pressed. This is the debounce time.

PIR sensors also have an adjustable debounce time, which can be used to reduce their sensitivity

by increasing the debounce time.

The default value is 48 milliseconds for wall switches and 96 milliseconds for PIR sensors.

2.2.2 Long Press Time

A wall switch senses whether a button is pressed quickly or for a long period of time. The Long Press

setting determines what length of button press is interpreted as a long press. The default value is 400

milliseconds.

2.2.3 Ramp 1

This parameter gives the time taken to ramp a light from minimum to maximum brightness (or vice

versa), using the Up Key, Down Key or Down Cycle Key Commands. The default value is 4 seconds.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 119 120

Sem comentários

Clipsal C-Bus2 Especificações Página 59